In these videos I show and explain foot placement, both front and back and left to right, in relation to the front wing and how this effects foil control. I also explain the why and when I move the mast instead of my feet and what effect this has on foiling. For me foot placement has been crucial to have precise control and fly the foil wherever I want. When my feet are out of place or I don't know where my feet are in relation to the front wing I flail and crash.
Video 1 = 6:05
Video 2 = 3:10
Video 3 = 9:04
Video 4 = 7:07
Foil - One Time Membership Required
You must be a Foil - One Time member to access this content.
In this first video I explain the 3 axis of foiling: Pitch, Roll, and Yaw. This second video I give an overview or breakdown of what happens as I catch a wave and begin to foil. I explain how the wings function and how to navigate down the face of a wave and complete a ride.
Video 1 = 4:28
Video 2 = 10:12
Foil - One Time Membership Required
You must be a Foil - One Time member to access this content.
After several attempts I figured out how to make this DIY 360 camera pole or paddle mount to capture the look of a drone or "follow me" tracking video shot. When foil surfing I am often riding for 500 to over 1000 yards making it difficult to video the entire ride, and even more so to capture any close up detail. This homemade pole mount allows me to catch and ride waves normally AND video myself, my gear, and the wave in full detail.
Here are videos showing the paddle pole cam mount I use regularly, and the removable pole mount that I lend to friends (can be mounted to any paddle including adjustable length paddles). The first video is an overview of the 360 camera mounts, second and third videos go in depth on how I made the mounts, and the fourth video shows how I mount a 360 camera near the blade of a paddle. Full parts list and where to buy everything needed is also included in this post.
Foil - One Time Membership Required
You must be a Foil - One Time member to access this content.
Another 6 months or so of foil sessions, guesstimating my total to be somewhere between 250 and 300 sessions, I stopped counting at 150. I have not ridden a non-foil board since June of 2018 (2 days in Maui). The speed, length or ride, and maneuverability of a foil is so far beyond what I can do on a surfboard.
The best part is the freedom, the expansive open space to roam AND share a wave with multiple foilers, and we are stoked and welcome each other dropping in. The crowded, sitting in a claustrophobic pack of hostile short board wave jockeys seems so stifling and antiquated, I literally cannot imagine going back to that.
I now feel much kinship with the pelicans and all birds. A foil lineup looks more like the ancient Hawaiian and Polynesian depictions of their surfing – together – for joy and playing with each other in the ocean.
A couple years back I tried a 360 camera while surfing. I scored some footage but the editing was an unexpected ridiculously long and tedious ordeal, and the camera was really heavy. So I sent it back and gave up on 360 VR video.
This week I found a lighter camera and am surprised at how relatively easy the software is to work with, and the GPS speed and distance overlay works! Foil surfing can difficult to capture with the long rides and the board being above the water and the hydrofoil submersed. The 360 cam seems like a good solution. So here is my second go at filming in 360 and first time uploading in immersive VR:
Here is a video tutorial showing how I build with bamboo. I dedicated years to discovering how to make an action camera mount out of plants: bamboo, hemp, and plant based resin.
I procrastinated in making this tutorial partly because it’s difficult to build and film at the same time, I had already made mounts for myself, and I enjoyed being one of the few with this unique camera angle.
Now with foil surfing I have seen a revival in foilers using pole cams, myself included. So I was inspired to make an ultralight bamboo design for foiling.
In these videos I show and explain foot placement, both front and back and left to right, in relation to the front wing and how this effects foil control. I also explain the why and when I move the mast instead of my feet and what effect this has on foiling. For me foot placement has been crucial to have precise control and fly the foil wherever I want. When my feet are out of place or I don't know where my feet are in relation to the front wing I flail and crash.
In this first video I explain the 3 axis of foiling: Pitch, Roll, and Yaw. This second video I give an overview or breakdown of what happens as I catch a wave and begin to foil. I explain how the wings function and how to navigate down the face of a wave and complete a ride.
After several attempts I figured out how to make this DIY 360 camera pole or paddle mount to capture the 
Another 6 months or so of foil sessions, guesstimating my total to be somewhere between 250 and 300 sessions, I stopped counting at 
A couple years back I tried a 
Here is a video tutorial showing how I build with bamboo. I dedicated 
